Got Three Minutes?
A quick check to insure your next motorcycle ride is a great one
"What a day for a ride," you think to yourself.
What you should be thinking, though, is "Is my ride ready for the day?"It's a valid question, no matter how often or infrequent you ride. Either on-the-road usage and vibration or in-the-garage inactivity can take their toll on your bike, potentially degrading safety, control, performance and comfort.
That's why the Motorcycle Safety Foundation recommends a short pre-ride check of your favorite two-wheeler before every ride. To help you remember what to check, the MSF came up with the acronym T-CLOCS, which stands for Tires, Controls, Lights, Oil, Chassis and Sidestand.
These are simple, easy-to-access items that anyone who rides should be able to identify and check. And despite the length of the MSF's list, you can probably check everything in about three minutes. Depending on what you find, that could be the best three minutes you spend all day.
Tires and wheels
Since these are where you and the road meet, they're probably the most important things to look over. A problem can affect handling—sometimes severely.
Are your rims free of dings? Are your spokes tight and straight? Check pressures in both tires. Since most manufacturers specify pressures for cold tires, this is the only accurate way to check them, as they heat up quickly on the road, raising the pressure. Consult your owner's manual or call your tire manufacturer's hotline for the proper pressures for your particular bike.
If you own multiple bikes, it may be difficult to remember all those different tire specs. And since this is one of those critical things you should check often, you may want to make a small card with each tire's recommended pressure, then hang it on your garage wall, or anywhere that's handy.
While you're down there checking the tires, make sure you've got plenty of tread. You should have more than 1/16 of an inch, about the distance between Lincoln's head and the top of a penny. Remove foreign objects that may have lodged in the treads, and make sure there aren't any cuts in the tire. A scuff is nothing to be worried about, but if it's a deep scratch, you might want to have it checked.
Controls and cables
Lights
Seeing and being seen are two great ways to avoid unwanted incidents on the road, so making sure your lights work is key.
Start by turning on your ignition. Are the headlight's high beam and low beam working? Does the taillight come on? Does the brake light come on when you depress the brake pedal and lever? Check left and right turn signals, front and rear. Remember that the cause of a malfunction here could be a relay or bulb.
Lastly, don't forget to check your horn.
Oil and fuel
Running out of gas can be inconvenient, but running out of oil can turn your bike into an inert display of public art. Even some new bikes can use enough oil to be down a quart between oil changes, so check it before every ride.
Chassis
If you have an adjustable suspension, remember to read your owner's manual and adjust it properly for the load you'll be carrying and the type of riding you'll be doing.
Kickstand and centerstand
The kickstand is a handy little item—it's what keeps your motorcycle off the ground. Make sure it's not cracked or bent. Check the spring or springs. Are they in place, and do they have enough tension to keep the kickstand safely up?
Don't forget to look at the engine cut-out switch or pad, if so equipped.
If everything's in place and operating properly you're done, and you're good to go. Enjoy the day.
No comments:
Post a Comment